HP ProCurve 530 NA, Руководство по управлению и настройке

Страница: 185 / 556

6-33
Wireless Interface Configuration
Adaptive Tx Power Control
Figure 6-10. Setting Adaptive Transmit Power Control Parameters
To Configure Adaptive Transmit Power Control:
1. Select
Network Setup > Radio
.
2. Click
Status On
to enable the radio.
3. Select
IEEE 802.11g Mode
.
4. Click the
Edit
button for
Advanced Settings
. A pop-up window for Advanced
Settings opens (see Figure 6-7).
5. Select the
Adaptive Tx Power Control Enabled
button to enable ATPC.
6. Depending on the scope of the neighboring APs you want to include in the
ATPC calculations, do one of the following:
a. To adapt transmit power to all neighboring APs (on the same
channel), click the
Avoid Neighbor APs Enabled
button.
b. To adapt transmit power to a group of specific neighboring APs, enter
the
RF Group Name
that identifies the group.
c. To adapt transmit power to neighboring APs according to their
respective SSID lists, click the
Avoid Neighbor APs Disabled
button and
leave the
RF Group Name
field blank.
7. Select the Adaptive Mode you want, by clicking either the AP button or
the
AP + Clients
button.
8. To establish the range of Transmit Power Control adjustments, enter a
value from 0 to 18dB for
TX Power Control Reduction
.
9. Select
[Update]
to save the ATPC settings.