manualshive.com logo in svg

HP ProCurve 530 NA, Руководство по управлению и настройке

Поделиться
Скачать
HP ProCurve 530 NA Скачать руководство пользователя страница 531

D-15

Open Source Licenses

Hardware and Products, and (v) distribute any Products that include the Software, the 
Documentation, or software in which the  Specifications have been implemented. 

2.2

Trademark License.  InMon hereby grants to Licensee a perpetual (subject to InMon's 

termination rights under Section 7 below), nonexclusive, royalty-free, worldwide,  transferable, 
sublicensable license to use the Trademark on or in connection with the  Software, the 
Documentation, the Specifications and any software that implements the  Specifications.  

2.3

Restrictions.  Licensee agrees that it will not use the Software in a way  inconsistent with 

the license granted in Section 2.1.  Further, Licensee agrees that, in  exercising its rights under the 
license granted to it in this Agreement, Licensee will: 

(i) strictly adhere to and fully comply with the Specifications

(ii) use the Trademark,  and no other mark, to identify the Software, the Documentation, the 
Specifications and any  Products that implement the Specifications;

(iii) place, in a font or graphic design  designated by InMon,  the phrase "sFlow(R)" on any 
technical documentation,  sales/marketing materials, catalogs, or other such materials relating to 
products it  manufactures or markets which it has configured to be compatible with the Software or  
otherwise implement the Specifications;

(iv) in connection with any Products shipped to or  sold in other countries that include the Software 
or any software that implements the  Specifications, comply with the patent and trademark laws 
and practice of such other  country; and (v) not alter or impair any acknowledgment of copyright or 
trademark rights of InMon that may appear in or on the Software, the Documentation or the 
Specifications. 

In  the event InMon determines that Licensee is not complying with its obligations under  clauses 
(i)-(v) above, InMon shall notify Licensee of such non-compliance, and if Licensee  fails to correct 
such non-compliance within three (3) months, InMon may immediately  terminate this Agreement 
as provided under paragraph 7 below and pursue any and all  actions and remedies as it deems 
necessary, including, but not limited to breach of  contract.   

3.

Ownership.  Except for the license expressly granted in Section 2, Inmon hereby  retains 

all right, title, and interest in and to the Trademark and all its Intellectual  Property Rights in the 
Software, the Documentation and the Specifications.  Licensee  obtains no rights hereunder in the 
Trademark, Software, Documentation or Specifications by  implication, estoppel or otherwise.  
Licensee acknowledges that the Trademark, Software,  Documentation and Specifications are 
being licensed and not sold under this Agreement, and  that this Agreement does not transfer title 
in the Trademark, Software, Documentation or  Specifications, or any copy thereof, to Licensee.

4.

Support.  Inmon shall have no obligation under this Agreement to (a) supply  maintenance 

or support, bug fixes or error corrections to the Licensed Software,  (b) supply future versions of 
the Licensed Software or (c) provide Licensed Software  development tools to Licensee.

5.

Warranty.  INMON HEREBY DISCLAIMS ALL WARRANTIES, EITHER EXPRESS, 

IMPLIED OR  STATUTORY, WITH RESPECT TO THE TRADEMARK, THE SOFTWARE, THE 

Содержание ProCurve 530 NA













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды