HP PROCURVE 2520, Руководство по управлению и настройке

Страница: 142 / 544

Switch Memory and Configuration
Multiple Configuration Files
TFTP: Copying a Configuration File from a Remote Host
Syntax: copy tftp config < dest-file > < ip-addr > < remote-file > < pc | unix >
This is an addition to the copy tftp command options. Use
this command to download a configuration file from a TFTP
server to the switch.
Note: This command requires an empty memory slot in the
switch. If there are no empty memory slots, the CLI displays
the following message:
Unable to copy configuration to "< filename >".
For more on using TFTP to copy a file from a remote host,
refer to “TFTP: Copying a Configuration File from a Remote
Host” on page A-24.
For example, the following command copies a startup-config file named
test­
01.txt from a (UNIX) TFTP server at IP address 10.10.28.14 to the first empty
memory slot in the switch:
ProCurve(config)# copy tftp config test-01 10.10.28.14
test-01.txt unix
Xmodem: Copying a Configuration File to a Serially
Connected Host
Syntax: copy config < filename > xmodem < pc | unix >
This is an addition to the
copy < config > xmodem
command
options. Use this command to upload a configuration file
from the switch to an Xmodem host.
For more on using Xmodem to copy a file to a serially
connected host, refer to “Xmodem: Copying a Configuration
File to a Serially Connected PC or UNIX Workstation” on
page A-26.
6-36