HP ProBook 470 G1 Скачать руководство пользователя

Страница: 122 / 149

Using f11 recovery tools

CAUTION:

Using f11 recovery tools completely erases hard drive contents and reformats the hard

drive. All files you have created and any software installed on the computer are permanently

removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that

were installed at the factory. Software not installed at the factory must be reinstalled.
To recover the original hard drive image using

f11

If possible, back up all personal files.

If possible, check for the presence of the Windows partition and the HP Recovery partition.
Click Start, right-click Computer, click Manage, and then click Disk Management.

NOTE:

If the HP Recovery partition is not listed, you must recover your operating system and

programs using the Windows 7 operating system DVD and the Driver Recovery disc (both

purchased separately). For additional information, see Using a Windows 7 operating system

DVD (purchased separately) on page 41.

If the HP Recovery partition is listed, restart the computer, and then press

esc

while the "Press

the ESC key for Startup Menu" message is displayed at the bottom of the screen.

Press

f11

while the "Press <F11> for recovery" message is displayed on the screen.

Follow the on-screen instructions.

Using a Windows 7 operating system DVD (purchased separately)

To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to

http://www.hp.com/go/contactHP

. For worldwide support, go to

http://welcome.hp.com/country/us/en/

wwcontact_us.html

. You can also order the DVD by calling support. For contact information, see the

Worldwide Telephone Numbers booklet included with the computer.

CAUTION:

Using a Windows 7 operating system DVD completely erases hard drive contents and

reformats the hard drive. All files you have created and any software installed on the computer are

permanently removed. When reformatting is complete, the recovery process helps you restore the

operating system, as well as drivers, software, and utilities.
To initiate recovery using a Windows 7 operating system DVD:

NOTE:

This process takes several minutes.

If possible, back up all personal files.

Restart the computer, and then insert the Windows 7 operating system DVD into the optical

drive before the Windows operating system loads.

When prompted, press any keyboard key.

Follow the on-screen instructions.

Click Next.

Select Repair your computer.

Follow the on-screen instructions.

110 Chapter 12 Backup and recovery in Windows 7

Содержание ProBook 470 G1






















































































































































Результаты поиска

Содержание ProBook 470 G1

Отзывы:

Похожие инструкции для ProBook 470 G1

Бренды по названию

Популярные бренды

HP ProBook 470 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProBook 470 G1

Отзывы:

Похожие инструкции для ProBook 470 G1

Бренды по названию

Популярные бренды