HP ProBook 430 G1 страница 90 Скачать руководство пользователя

Страница: 90 / 139

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the AC

adapter. Do not download or install a BIOS update while the computer is running on battery power,

docked in an optional docking device, or connected to an optional power source. During the

download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

Select

Start

Help and Support

Maintain

Follow the on-screen instructions to identify your computer and access the BIOS update you want

to download.

At the download area, follow these steps:

Identify the BIOS update that is later than the BIOS version currently installed on your

computer. Make a note of the date, name, or other identifier. You may need this information

to locate the update later, after it has been downloaded to your hard drive.

Follow the on-screen instructions to download your selection to the hard drive.

Make a note of the path to the location on your hard drive where the BIOS update is

downloaded. You will need to access this path when you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the

download is complete. If no instructions are displayed, follow these steps:

Open Windows Explorer by selecting

Start

Computer

Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

BIOS Setup Menu

The tables in this section provide an overview of the BIOS Setup menu options.

Chapter 7 Computer Setup (BIOS) and Advanced System Diagnostics

Содержание ProBook 430 G1












































































































































Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды

HP ProBook 430 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды