HP ProBook 430 G1 страница 115 Скачать руководство пользователя

Страница: 115 / 139

CAUTION:

Some Automatic Repair options will completely erase and reformat the hard drive. All

files you have created and any software installed on the computer are permanently removed. When

reformatting is complete, the recovery process restores the operating system, as well as the drivers,

software, and utilities from the backup used for recovery.

If possible, back up all personal files.

If possible, check for the presence of the HP Recovery partition and the Windows partition.

From the Start screen, type

, and then click

File Explorer

– or –

From the Start screen, type

, and then select

Computer

NOTE:

If the Windows partition and the HP Recovery partition are not listed, you must recover

your operating system and programs using the Windows 8 operating system DVD and the

Driver

Recovery

media (both purchased separately). For additional information, see

Using Windows 8

operating system media (purchased separately) on page 106

If the Windows partition and the HP Recovery partition are listed, restart the computer. After

Windows has loaded, press and hold the

shift

key while clicking

Restart

Select

Troubleshoot

, then select

Advanced Options

, and then select

Automatic Repair

Follow the on-screen instructions.

NOTE:

For additional information on recovering information using the Windows tools, perform a

search for these topics in HP Support Assistant. To access HP Support Assistant on the Start screen,

select the

HP Support Assistant

app.

Using f11 recovery tools

CAUTION:

Using

f11

completely erases hard drive contents and reformats the hard drive. All files

that you have created and any software that you have installed on the computer are permanently

removed. The

f11

recovery tool reinstalls the operating system and HP programs and drivers that were

installed at the factory. Software not installed at the factory must be reinstalled.

To recover the original hard drive image using

f11

If possible, back up all personal files.

If possible, check for the presence of the HP Recovery partition: From the Start screen, type

, and

then select

Computer

NOTE:

If the HP Recovery partition is not listed, you must recover your operating system and

programs using the Windows 8 operating system media and the

Driver Recovery

media (both

purchased separately). For additional information, see

Using Windows 8 operating system media

(purchased separately) on page 106

If the HP Recovery partition is listed, restart the computer, and then press

esc

while the “Press the

ESC key for Startup Menu” message is displayed at the bottom of the screen.

Performing a system recovery

105

Содержание ProBook 430 G1












































































































































Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды

HP ProBook 430 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды