HP ProBook 430 G1 страница 109 Скачать руководство пользователя

Страница: 109 / 139

Creating recovery media with HP Recovery Disc
Creator

HP Recovery Disc Creator is a software program that offers an alternative way to create recovery

media. After you successfully set up the computer, you can create recovery media using HP Recovery

Disc Creator. This recovery media performs a system recovery if the hard drive becomes corrupted. A

system recovery reinstalls the original operating system and the software programs installed at the

factory, and then configures the settings for the programs.

HP Recovery Disc Creator can create two kinds of recovery DVDs as follows:

●

Windows DVD—Installs the operating system without additional drivers or applications. Choosing

this selection creates a DVD that restores the original operating system and the software programs

installed at the factory.

●

Driver DVD—Installs specific drivers and applications only, in the same way that the HP Software

Setup utility installs drivers and applications.

Creating recovery media

NOTE:

Operating system recovery media can be created only once. Thereafter, the option to create

that media will not be available.

Select

Start

All Programs

Security and Protection

HP Recovery Disc Creator

Select

Driver DVD

Windows DVD

From the drop-down menu, select the drive for burning the recovery media.

Click the

Burn

button to start the burning process.

Backing up your information

Recovery after a system failure is as good as your most recent backup. Immediately after software

setup, you should create system repair discs (select models only) using HP Recovery Disc Creator using

the installed optical drive (select models only) or an optional external optical drive and back up your

system. As you add new software and data files, you should continue to back up your system on a

regular basis to maintain a reasonably current backup. The system repair discs (select models only) are

used to start up (boot) the computer and repair the operating system in case of system instability or

failure. Your initial and subsequent backups allow you to restore your data and settings if a failure

occurs.

You can back up your information to an optional external hard drive, a network drive, or discs.

Note the following when backing up:

●

Store personal files in the Documents library, and back it up regularly.

●

Back up templates that are stored in their associated programs.

Creating recovery media with HP Recovery Disc Creator

Содержание ProBook 430 G1












































































































































Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды

HP ProBook 430 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProBook 430 G1

Отзывы:

Похожие инструкции для ProBook 430 G1

Бренды по названию

Популярные бренды