HP Pavilion p6000 - Desktop PC Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 74

HP Pavilion p6000 - Desktop PC Скачать руководство пользователя страница 52

8 Configuring servers using HP P6000 SmartStart

Configuring management servers using HP P6000 SmartStart

Use this procedure if you are connecting the P6300 EVA or P6500 EVA to a management server
for server-based management. To complete array configuration for server-based management, see
“Completing the array configuration” in the HP P6000 Command View Installation Guide.

1.

Insert the HP P6000 SmartStart CD in the drive of the management server. The HP P6000
SmartStart tool runs automatically.

2.

Read the conceptual information and browse the online help.

3.

From the main menu, select

Start Now

>

Configure HP EVA management server

.

4.

Follow the instructions in the wizard.

Configuring application servers using HP P6000 SmartStart

You can use HP P6000 SmartStart to configure Windows or Linux applications servers (hosts).

1.

Insert the HP P6000 SmartStart CD in the drive of an application server. This may be the same
server as your management server.

The HP P6000 SmartStart Storage tool runs automatically.

2.

Do one of the following:

•

Select

Start Now

>

Configure HP FC application server

.

•

Select

Start Now

>

Configure iSCSI application server

.

The selected wizard feature appears.

3.

Follow the instructions in the wizard.

4.

Repeat this configuration process for each server in your HP P6000 Command View
configuration.

Configuring application servers manually

To configure application servers manually, see the "Configuring application servers" chapter in
the HP P6300/P6500 Enterprise Virtual Array User Guide for more information. See

Related

information

for the document location.

Using and monitoring your storage

To use the storage you have installed:

1.

Start a server application.

2.

Browse to a file system window and verify the drive letter of the virtual drive you have created.

Controller software recovery

A recovery CD containing the original XCS controller software installed on the array is shipped
with your EVA. The CD is only needed for recovery purposes. The latest controller software can
be found on the HP Software Depot web page:

http://www.software.hp.com

Installing HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the
installation or upgrade of your product and to enable enhanced delivery of your HP Warranty,
HP Care Pack Service, or HP contractual support agreement. HP Insight Remote Support supplements
your monitoring, 24x7, to ensure maximum system availability by providing intelligent event

52

Configuring servers using HP P6000 SmartStart

«
...
50
51
52
53
54
...
»

Содержание Pavilion p6000 - Desktop PC











































































Отзывы:

Нет отзывов