manualshive.com logo in svg

HP Pavilion p6000 - Desktop PC, Руководство по установке, Страница: 15 / 74

Поделиться
Скачать
HP Pavilion p6000 - Desktop PC Скачать руководство пользователя страница 15

1.

Click the

Discovery

tab and when manually discovering iSCSI target portals:

a.

Click

Add

under Target Portals.

b.

Enter the IP address of the iSCSI port of the 1 GbE iSCSI Modules or the 10GbE
iSCSI/FCoE modules.

c.

Click

Advanced

.

d.

Select the

CHAP Login Information

check box.

e.

Enter the CHAP secret for the 1 GbE iSCSI modules or the 10GbE iSCSI/FCoE modules
discovered iSCSI initiator in the Target Secret box, for example, CHAPsecret01.

f.

Click

OK

and the initiator completes target discovery.

2.

Click

Targets

and select the appropriate target for login.

3.

Click

Log On

and then click

Advanced

.

4.

Select the

CHAP Login Information

check box.

5.

Enter the CHAP secret for the discovered iSCSI initiator of the iSCSI or iSCSI/FCoE modules
in the Target Secret box.

6.

Click

OK

twice.

To enable bi-directional CHAP for the iSCSI initiator entries of the iSCSI or iSCSI/FCoE modules:

1.

Run the

set chap

CLI command to determine if the iSCSI initiator IQN is listed.

MEZ75 (admin) #> set chap
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index iSCSI Name
----- ----------
0 iqn.2004-09.com.hp:fcgw.mez75.1
1 iqn.2004-09.com.hp:fcgw.mez75.1
2 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c68968
3 iqn.2004-09.com.hp:fcgw.mez75.1.01.5001438004c6896c
4 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c68968
5 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c68968
6 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c68968
7 iqn.2004-09.com.hp:fcgw.mez75.1.02.5001438004c6896c
8 iqn.2004-09.com.hp:fcgw.mez75.1.03.5001438004c6896c
9 iqn.2004-09.com.hp:fcgw.mez75.1.04.5001438004c6896c
10 iqn.1991-05.com.microsoft.perf2.sanbox.com
Please select a iSCSI node from the list above ('q' to quit): 10
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
CHAP (0=Enable, 1=Disable) [Disabled] 0
CHAP Secret (Max = 100 characters) [ ] ************
All attribute values that have been changed will now be saved.

Plan your storage configuration

15

Содержание Pavilion p6000 - Desktop PC











































































Отзывы:

Нет отзывов