
6 English
Basic Settings for an Residential Gateway
If you want to connect to a home network using an Access Point, use the
Add/Edit
Configuration Profile
window to:
• Connect to an Access Point
• Set the Network Name and Encryption Key.
To connect to a Wireless LAN Access Point:
1
In the
Network Name
field, enter the 6-character ID code to define the name of the
wireless network that you want to connect to.
NOTE
The 6-character ID code is unique and can be found on the back of the Wireless LAN
Access Point by removing the rear cover. Refer to the Wireless LAN Access Point
Installation Guide
for full instruction on obtaining the ID code.
2
In the
Encryption Key
field, enter the last 5 digits of the ID code. If you have changed
the Encryption Key on the Access Point, you must enter the new value as well.
3
Click
OK
to confirm and return to the
Add/Edit Configuration Profile
window.
4
Click
OK
again to proceed with the installation
.
USB.book Page 6 Monday, October 30, 2000 5:29 PM
Содержание P1980A
