HP OMNIBOOK 3000 Скачать руководство пользователя страница 41

Страница: 41 / 133

Getting Comfortable

Checking the Status of the OmniBook

3-15

Indicator

Meaning

Battery low.

The outline blinks when the battery charge is critically low.

The OmniBook also beeps.

Defective battery.

An empty battery icon with ac plug not blinking. No

battery activity; no charging.

Overheated battery.

The battery is too hot to charge.

CD-ROM drive, hard disk drive, or Zip drive.

The OmniBook is

accessing one of these built-in drives.

Floppy disk drive.

The OmniBook is accessing the floppy disk drive.

PC Card.

There is activity between the PC Card and the computer.

Suspend mode.

These symbols flash from left to right when the

OmniBook is suspended (turned off by pressing the power button briefly).
If ac power is not connected, the green power light also blinks slowly.

Caps Lock.

Caps Lock is active.

Num Lock.

Num Lock is active (Fn+F9).

Keypad Lock.

The built-in embedded keypad is active (Fn+F8). Num Lock

must also be on for the numeric keys. Otherwise, cursor keys are active.

Scroll Lock.

Scroll Lock is active (Fn+F10).

Содержание OMNIBOOK 3000






































































































































Результаты поиска

Содержание OMNIBOOK 3000

Отзывы:

Бренды по названию

Популярные бренды

HP OMNIBOOK 3000, Справочное руководство

Результаты поиска

Содержание OMNIBOOK 3000

Отзывы:

Бренды по названию

Популярные бренды