HP mt43 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 105

background image

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download and

install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:

Do not disconnect power on the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.

To access HP Support, go to

http://www.hp.com/support

, and select your country. Select Drivers &

Downloads, and then follow the on-screen instructions to access BIOS downloads.

2.

At the BIOS download area, follow these steps:

a.

Identify the most recent BIOS update and compare it to the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information to
locate the update later, after it has been downloaded to your hard drive.

b.

Follow the on-screen instructions to download your selection to the hard drive.

Make a note of the path to the location on your hard drive where the BIOS update is downloaded.
You will need to access this path when you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before installing

any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download
is complete. If no instructions are revealed, follow these steps:

1.

Type

file

in the taskbar search box, and then select File Explorer.

2.

Select your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder that contains the update.

4.

Double-click the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Changing the boot order using the f9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:

1.

Access the Boot Device Options menu:

●

Turn on or restart the computer, and when the HP logo appears, press

f9

to enter the Boot Device

Options menu.

2.

Select a boot device, then press

enter

.

Using Computer Setup

65

«
...
73
74
75
76
77
...
»

Содержание mt43










































































































Отзывы:

Нет отзывов

Похожие инструкции для mt43

Бренд: YOKOGAWA Страницы: 22

Бренд: TYAN Страницы: 170

Бренд: ACTi Страницы: 11

Бренд: MO-SYS Страницы: 26

Бренд: Hitachi Страницы: 58

Бренд: Hitachi Страницы: 192

Бренд: Digi Страницы: 118

Turbo NAS TS-219P

Бренд: QNAP Страницы: 49

SUPERSERVER 6113L-8

Бренд: Supero Страницы: 104

SUPERSERVER 6017R-NTF

Бренд: Supero Страницы: 126

SuperServer 5017R-MF

Бренд: Supero Страницы: 106

SUPERSERVER 5015A-EHF

Бренд: Supero Страницы: 106

SuperServer 5013S-8

Бренд: Supero Страницы: 110

Supero SUPERSERVER 5015B-NT

Бренд: Supero Страницы: 98

Бренд: Supero Страницы: 122

Бренд: Supero Страницы: 121

SuperStorage L-Serie

Бренд: Supermicro Страницы: 1

Бренд: Supermicro Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды