HP MSM415 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 52

HP MSM415 Скачать руководство пользователя страница 25

Getting Started

Connect the Sensor to the Network

3.

Once the

Java ™ Plug-in Control Panel

dialog is open, go to the Browser tab and

select the checkbox

Microsoft Internet Explorer

.

4.

On the

End User License Agreement (EULA)

screen, read the agreement carefully

and select

I have read and agree to the Licensing Agreement above

. Click

Next

.

5.

If you see the Welcome screen, close the window. You are done with the Server setup. You

can revisit the Welcome screen later.

Connect the Sensor to the Network

Ensure that the Server is already running on your network. Add the DNS entry

wifi-security

server

on all DNS Servers. This entry should point to the IP address of the Server.

To connect the MSM415 Sensor to the network, complete the following:

1.

Ensure that DHCP is running on the subnet to which the Sensor will be connected.

2.

Connect one end of the Network Interface cable to the Ethernet port (port 1) on the

Sensor.

3.

Connect the other end of the Network Interface cable to an Ethernet jack that is

connected to the desired subnet.

Important

If DHCP is not enabled on a subnet, Sensors cannot connect to that subnet with zero

configuration. See

“Manually Configuring the Sensor (Optional)” on page 2-6

.

4.

Wait for two minutes.

5.

Check the Status LEDs on the Sensor. If all LEDs glow green, then the Sensor is

operational and connected to the Server.

2-5

«
...
23
24
25
26
27
...
»

Содержание MSM415





















































Отзывы:

Нет отзывов