HP MSM415 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 52

HP MSM415 Скачать руководство пользователя страница 17

Important

Caution

Hardware Installation

Installing RF Security Sensors

Power

Ethernet

Radio

Description

Slow blink
Green

Slow Blink

Any

The Sensor is unable to connect to the RF Manager Server.

Slow blink
Green

Any

Solid Green

There is an error on 802.11a/b/g interfaces.

Slow blink
Green

Any

Any

The Sensor is experiencing a software error.

Off

Off

Off

The Sensor is not powered on or it is in the process of starting
up.

Installing RF Security Sensors

To prevent abuse and intrusion by unauthorized personnel, it is extremely important to install

Sensors such that it is difficult to unplug the devices from the network or from the power outlet.

For information on how to install the MSM325 Sensor or MSM320 with Sensor license, see the

MSM320 Quickstart. For controlled-mode operation, follow the directions through the end of the

Installation section. For autonomous-mode operation, follow the directions through step D of the
Initial Configuration procedure.

For information on how to install the MSM335 Sensor see the MSM335 Quickstart. For controlled-

mode operation, follow the directions through the end of the Installation section. For
autonomous-mode operation, follow the directions through step D of the Initial Configuration

procedure.

Installing the MSM415 Sensor

Professional Installation Required

Prior to installing or using the MSM415, consult with a professional installer trained in RF

installation and knowledgeable in local regulations including building and wiring codes, safety,
channel, power, indoor/outdoor restrictions, and license requirements for the intended country. It

is the responsibility of the end user to ensure that installation and use comply with local safety

and radio regulations.

Cabling

: You must use the appropriate cables, and where applicable, surge protection, for your

given region. For compliance with EN55022 Class-B emissions requirements use shielded Ethernet
cables. Cables with large boots may not insert into the RJ-45 connectors properly. It is recommended
that you do not use such cables.

Plenum installation:

The MSM415 and appropriate cabling can be installed in a plenum (UL2043

rating). The MSM415 should be installed with its top surface facing the floor (similar orientation as
in a ceiling installation). However, it is left to a qualified installer to determine how to install/secure
the MSM415 in a plenum in an appropriate and safe manner. Plenum-rated cables and attachment
hardware must be used.

Safety:

Take note of the following safety information during installation.

If your network covers an area served by more than one power distribution system, be sure all

safety grounds are securely interconnected.

1-11

«
...
15
16
17
18
19
...
»

Содержание MSM415





















































Отзывы:

Нет отзывов