manualshive.com logo in svg

HP MSA 30, Руководство пользователя, Страница: 46 / 53

Поделиться
Скачать
HP MSA 30 Скачать руководство пользователя страница 46

HP Storage Works Modular Smart Array 30 User Guide 

B-1 

  

COMPAQ CONFIDENTIAL 

Writer: Susan Caesar File Name: f-appb Electrostatic Discharge.doc 

Codename: northstar Part Number: 335900-002 Last Saved On: 10/2/03 3:53 PM 

B 

Electrostatic Discharge 

Preventing Electrostatic Damage  

A discharge of static electricity from a finger or other conductor may damage system 
boards or other static-sensitive devices. This type of damage may reduce the life 
expectancy of the device.  

To prevent electrostatic damage when setting up the system or handling parts:  

• 

Avoid hand contact by transporting and storing products in static-safe containers. 

• 

Keep electrostatic-sensitive parts in their containers until they arrive at static-free 
workstations. 

• 

Place parts on a grounded surface before removing them from their containers. 

• 

Avoid touching pins, leads, or circuitry. 

• 

Always be properly grounded when touching a static-sensitive component or 
assembly. 

Содержание MSA 30






















































Отзывы:

Нет отзывов