Removal and replacement procedures 27
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into the rack. The sliding rails could pinch your
fingers.
4.
After performing the installation or maintenance procedure, press the rail-release latches and slide
the server back into the rack.
Remove the server from the rack
To remove the server from an HP, telco, or third-party rack:
1.
Power down the server (on page
2.
Extend the server from the rack (on page
3.
Disconnect the cabling and remove the server from the rack. Reverse the server installation steps in
the documentation that ships with the rack-mounting option.
4.
Remove the server from the rack (on page
5.
Place the server on a sturdy, level surface.
Front bezel
This server has a removable bezel that must be unlocked and opened before accessing the front panel
components. The bezel should be kept closed during normal server operations.
Use the key provided with the server to unlock the bezel with a clockwise turn.
If necessary, remove the bezel.
Содержание ML350 - ProLiant - G2
