Installing and Configuring
Security
Use this menu option to set Power-on password protections and hardware security options.
Four choices are available under Security:
•
•
•
•
•
•
•
•
•
Change Supervisor Password
- Use this option to set the Supervisor password, which
will require a password to enter the Setup Utility or complete the boot process.
The Supervisor password must be set before setting the User password or Network Server
mode. Once the Supervisor password is set, the Supervisor can access and change all
fields in the Setup Utility screens.
Network Server Mode – When set, the system prompts for a password when booting
from a flexible disk or CD-ROM, but not when booting from a hard drive. The power
switch and keyboard are locked until the password is typed.
Change User Password
– Use this option to set the user password, which will require a
password to enter the Setup Utility or complete the boot process.
If the User password is set, the user may change the system time, date, user password,
and a limited number of items in the various screens of the Setup Utility. The user may
view all screens in the Setup Utility, but can't alter all of the settings.
Clear User Password
– Use this option to clear the user password.
Boot Sector Virus Protection
– Use this option to prevent computer viruses by
protecting the hard disk boot sector (partition table) from any change if enabled.
Exit
Use this menu option to save changes or discard changes, which reverts to previous settings.
When you exit, the HP server reboots.
Save Changes and Exit
– Use this option (or press the
F10
key) to save the changes you
have made and exit the Setup Utility.
Discard Changes and Exit
– Use this option (or press the
Esc
key) to exit the Setup
Utility without saving the changes you have made.
Discard Changes
– Use this option (or press the
F7
key) to discard any changes you
have made.
Load Optimal Defaults
– Use this option (or press the
F9
key) to load optimal values for
all items.
Load Failsafe Defaults
– Use the option (or press the
F8
key) to load failsafe values for
all items.
HP ProLiant ML150 Server Operations and Maintenance Guide
2-37
HP CONFIDENTIAL
Codename: Stone Soup Part Number: 343329-001 Last Saved On: 8/14/03 10:09 AM
