HP Media Vault mv5020, Руководство пользователя

Страница: 129 / 212

10-
This indicates that the hard drive has been installed, but has not been
initialized.
To add a hard drive to total storage
1
At the computer, click Start , All Programs , HP Media Vault , and
then Control Center .
2
On the Tools tab, click Customize HP Media Vault .
You are prompted for an administrator name and password if you set one
up. For additional information, see Editing System Settings on page 2-26 .
3
On the Disks tab, locate the internal disk you want to add.
4
Click Add .
5
Select an option for allocating the disk space.
Caution: It is important to select the storage space allocation option with
care. Changing how the storage space is allocated later may require you to
transfer all of the files to a separate device and reformat the drives.
ƒ
Allocate disk to make current storage mirrored (protects
current storage, RAID 1) - adds the internal drive as mirrored
storage space.
The type of mirroring supported on the Media Vault is called
Redundant Array of Independent Disks (RAID) RAID-1.
In RAID-1 mirroring, an identical copy of data written to one hard disk
is written to a second hard disk. Mirroring disks reduces your total
hard disk storage capacity by half. The advantage is that if one hard
disk fails, you have a copy of your data on the second hard disk.
ƒ
Allocate disk to expand current storage (increases current
storage) - combines the available space from the system drive and
the internal hard drive to make one large logical disk. The drive space
is not mirrored. If a non-mirrored drive fails, the files stored on the
failed drive are lost. If a drive is removed from the HP Media Vault, the
system is not operational until the drive is replaced.
6
Click Accept .