manualshive.com logo in svg

HP MCS, Руководство пользователя, Страница: 6 / 26

Поделиться
Скачать
HP MCS Скачать руководство пользователя страница 6

 

 

 

 

 

 

 

 

 

 

 

4

Table 4 provides dimensions and weights of a packed and unpacked MCS unit and rack that is not 

populated with rack-mounted components (i.e., an empty rack). 

Table 4. HP MCS and Server Cabinet Dimensions and Weights 

Detail 

Unpackaged rack with pre-installed MCS unit 

Packaged rack with pre-installed MCS unit 

Height 

78.7 in. (1999 mm) 

88.5 in. (2248 mm) 

Width 

35.8 in. (909 mm) 

48 in. (1220 mm) 

Depth 

50 in. (1270 mm) 

70 in. (1778 mm) 

Weight 

1190 lbs.* (540 Kg) 

1370 lbs.** (621.4 kg) 

*Weight of the fully assembled MCS and rack before any components are installed in the rack. 
**The packaged weight of the MCS, along with all packaging materials such as cartons and skid. 

Additional Resources 

Additional resources are available as follows: 

• 

For a complete list of HP rack options and accessories, go to the main rack page at 

www.hp.com/products/racks

 or to the main rack options page at 

www.hp.com/products/rackoptions

.  

• 

For a list of ProLiant servers and options, go to 

www.hp.com/products/proliant

. 

• 

For a list of HP power products such as UPS and PDU, go to 

www.hp.com/products/ups

.  

• 

For a complete list of HP server storage equipment, go to 

www.hp.com/products/serverstorage

. 

• 

For a list of the HP MCS documentation, including the HP Modular Cooling System Site Preparation 

Guide, go to 

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lan
g=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=1155256

.  

Certification and regulatory compliance 

For information on the HP MCS certification and regulatory compliance, refer to either of the 

following documents: 

• 

Quickspecs, available at 

http://h18004.www1.hp.com/products/servers/proliantstorage/racks/mcs/index.html?jumpid=reg_R1002_

USEN

 

• 

HP Modular Cooling System User Guide, available at 

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=Support

Manual&lang=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=

1155256

 

Содержание MCS



























Отзывы:

Нет отзывов