HP MCS Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 26

HP MCS Скачать руководство пользователя страница 5

3

Product components

Table 2 lists the key components of the HP MCS.

Table 2.

HP MCS key components

Component Description

Fan Module

A module containing one of the main, internal circulation fans. There are three hot-pluggable and
online serviceable fan modules within the HP MCS

.

Heat Exchanger

Module

An air-to-water heat transfer device is designed for demanding data center
environments and is the key component within the heat exchanger (hex) unit. There are

three hot-pluggable and online serviceable hex units within each HP MCS.

Patch Panel

The patch panel provides for connection of the AC power and network interfaces.

Water Group

A module containing the magnetic valve, flow meter, check valve and condensate

pump. There is one water group in each HP MCS.

Management

Module

The Management Module provides users with web-based capabilities to set, monitor
and control temperature and other parameters within the modular cooling unit, as well

as displays the health of the unit.

Automatic Door

Release Kit

An Automatic Door Release Kit is included as standard with every MCS. The

kit ships in the accessories box and is to be field-installed. The Automatic Door

Release Kit is designed to swing the MCS front and rear doors open in the case

of a sudden increase in the temperature inside the MCS. The open doors will
allow the IT equipment to cool using the air from the datacenter.

MCS Specifications

Table 3 lists HP MCS specification details.

Table 3.

HP MCS specifications

Detail

HP MCS specification

Voltage

208–230 VAC +/- 10%, 50–60 Hz

Height (including the rack)

200.7 cm (79 in.)

Width (including the rack)

91.2 cm (35.9 in.) maximum

Depth (including the rack and rack handle)

127 cm (50 in.)

Weight (including the empty rack)

512.6 kg (1130 lbs.)

Weight (gross with packaging)

557.2 kg (1230 lbs.)

Effective cooling with 25 I/minimum water
supply at 0º C, cold air at 25º C

35 kW

Rated current maximum

208 VAC–15 Amps

Cooling medium

Water

Minimum recommended water inlet temperature

7º C (45º F)

Permissible operating pressure (maximum)

100 pounds-per-square-inch (psi)

«
...
3
4
5
6
7
...
»

Содержание MCS



























Отзывы:

Нет отзывов