HP LTO-4 Ultrium 1760, Техническое справочное руководство

Страница: 31 / 46

HP LTO Ultrium 4 drives technical reference manual, volume 5: UNIX, Linux and OpenVMS configuration guide 29
If you are using a non-graphics terminal
1. At the command line type:
% smit -C tape
2.
The following is displayed:
If no device has been configured at this address before, select “
add a tape drive
” to set
up the address.
Otherwise, select “
change/show characteristics of a tape drive
”
3. A pop-up window is displayed:
Select “
ost
” or “
Other SCSI tape drive
” as the tape drive you wish to change.
If no device has been configured at this address before, choose connection addresses as
appropriate.
4. The following details are displayed:
Check the following values and change them if necessary:
• BLOCK Size = 0
• Use EXTENDED file marks = “no”
• RESERVE/RELEASE support = “yes”
• Set maximum delay for the READ/WRITE command = 1200
Click on the “
DO
” button to apply the changes.