HP LTO-4 Ultrium 1760, Техническое справочное руководство

Страница: 14 / 46

HP (HP-UX) servers and workstations 12
The lunpath hardware path for the above tape drive is
“
0/4/1/0.0x50060b0000b7f3c8.0x0
”.
•
The FC bus ID is “
0/4/1/0
” (including all the numbers separated by “
/
”).
From the remaining “
0x50060b0000b7f3c8.0x0
” portion:
•
Tape drive WWN (hexadecimal) =
0x50060b0000b7f3c8
• Tape drive SCSI LUN =
0x0
(hexadecimal SCSI-3 64-bit LUN identifier)
Adding stape and schgr (autoloader driver) to the kernel
For HP-UX 11i v1, 11i v2
If your tape drive or autoloader does not appear in
ioscan
listing or is listed with H/W Type
“
UNKNOWN
” you may need to install the appropriate drivers.
Use the ‘
sam
’ utility. Sam runs as a mouse driven GUI ( Figure 1 ) on a system with full graphics
capability, or as a console text-based interface ( Figure 2 ). If you use the text-based interface, use the
Tab and arrow keys to navigate, and the Return key to select.
Figure 1 SAM GUI