HP LASERJET ENTERPRISE 500, Справочник

Страница: 69 / 178

Help system
The HP PCL 6 Print Driver includes a full-featured Help system to provide assistance with printing and
configuration options.
“What's this?” Help
Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, and Windows 7
support What's this? Help. You can gain access to “What's this?” Help messages in any of the
following ways:
●
Right-click a feature or control. A pop-up Help window appears.
●
Click a feature or control, and then press the F1 key. The Help window for the currently selected
control appears.
Incompatible Print Settings messages
Incompatible Print Settings (constraint) messages are unsolicited messages that appear in
response to specific print-driver selections. These messages alert you to selections that are illogical or
impossible given the product capabilities or the current settings of other controls.
NOTE: Constraint messages are limited, and the underlying software architecture might accept some
settings that are illogical or impossible for the product to perform. Sending a job with incompatible
settings can lead to unexpected results. If print jobs do not print as expected, check the product
documentation for the product capabilities.
In supported Windows operating environments, some technically invalid print-driver configurations
result in warning messages. Duplexing, for example, is not possible when the Transparency paper type
is selected. The following figure shows an Incompatible Print Settings message.
Figure 3-1 An Incompatible Print Settings message
To resolve the conflicting settings, click Restore my previous settings. , and then click OK . The
driver resets the conflicting control back to its previous state.
If you want to keep the conflicting setting, click
Keep this setting, and I will change it later.
,
and then click OK .
NOTE: In this example, the conflict can be resolved manually. If the conflict is not resolved when the
driver is closed, then the same dialog appears again when a print job is sent to the product.
ENWW Help system 53