HP Jet Fusion 4200 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 56

background image

Build Manager

HP SmartStream 3D Build Manager is separate software that, unlike HP SmartStream 3D Command Center
(which helps you to monitor your printers), allows you to prepare and submit your jobs to the printer. The
computer that runs this software must have a direct network connection with the printer and with the computer
running HP SmartStream 3D Command Center Server, and must meet the following requirements:

●

Minimum: Intel Core i5, 16 GB RAM, 2 GB dedicated graphics card with DirectX 11 support

●

Recommended: Intel Core i7, 64 GB RAM, 4 GB dedicated graphics card with DirectX

IMPORTANT:

Running Build Manager in a virtual environment is not supported.

If you are planning to run non-HP software, make sure your computer complies with its requirements and that it
is installed before the agreed date of printer installation.

Test your connection to HP Cloud

You are responsible for testing your network before the day of installation to check your connection to the HP
Cloud from the computer running Command Center Server.

IMPORTANT:

If you have any doubts or problems during this procedure, see the HP SmartStream 3D Command

Center – Installation and troubleshooting guide, which you can download from

SmartStream3DCommandCenter/manuals

Process overview

1.

Download HP SmartStream 3D Command Center Server to the designated computer that will be connected
to the HP Cloud 24/7.

2.

Install HP SmartStream 3D Command Center Client in the same computer and in any other computer in the
same network on which you intend to use the software.

3.

Sign in to your HP 3D Center by PrintOS account.

4.

Add the Command Center Server app to your HP 3D Center by PrintOS account.

Server installation

1.

Download the latest version of HP SmartStream 3D Command Center Server from

SmartStream3DCommandCenter/software

.

2.

Ensure that this computer will run 24/7 by disabling all policies that could lead the computer to switch to
sleep or standby mode.

3.

Install the HP SmartStream 3D Command Center Server into the computer you have selected to be the
server of the system, meeting the requirements explained in

Command Center Server computer

. Restart when required.

ENWW

Test your connection to HP Cloud

41

«
...
43
44
45
46
47
...
»

Содержание Jet Fusion 4200

























































Отзывы:

Нет отзывов

Похожие инструкции для Jet Fusion 4200

image Prograf iPF785 Series

Бренд: Canon Страницы: 136

Бренд: GBC Страницы: 110

Figure 4 Standalone

Бренд: 3D Systems Страницы: 2

Бренд: Chamjin I&C Страницы: 21

Бренд: Valentin Страницы: 96

Бренд: Datamax Страницы: 95

Mark II E-4205e

Бренд: Datamax Страницы: 72

Saddle Finisher-AF2

Бренд: Canon Страницы: 244

DiMAGE Scan Elite 5400 II

Бренд: Konica Minolta Страницы: 38

Liquid Crystal Opus

Бренд: PhotoCentric Страницы: 12

Бренд: TRAK Страницы: 98

Бренд: A&D Страницы: 8

Бренд: Star Micronics Страницы: 194

Бренд: Cashino Страницы: 61

Бренд: Oki Страницы: 110

4400B - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 24

Бренд: QMS Страницы: 188

Бренд: Sinfonia Technology Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды