HP J9666A, Быстрый старт

Страница: 27 / 40

C-3
Hardware Components
Internal Ports
Internal Ports
The module receives traffic from and transmits traffic to its host switch on
two internal Ethernet ports, each of which supports 10 Gbps. When a module
is installed into the host switch, the switch automatically detects these internal
ports and names them according to the slot in which the module is installed.
For example, if the module is installed in slot A, the switch references the
ports as A1 and A2.
When the Windows Server 2008 R2 that runs on the module boots up, these
ports are assigned to Local Area Connection interfaces on the server. (The
module’s management port is assigned to a third Local Area Connection
interface). By default, the interface that is associated with the <slot>1 port is
disabled, and the interface that is associated with the <slot>2 port is enabled.
C a u t i o n
Do not disable the <slot>2 port. If you do, the communications between the
HP zl switch and the SBM will fail, causing first the module to fail and then
the switch to report the SBM as a malfunctioning module.
Serial Numbers
Serial numbers are required when contacting HP or a reseller for warranty
assistance or for coverage under a service agreement. For future reference,
record the serial and product numbers in the warranty booklet.
The product ships as a bundle. From a warranty perspective, a bundle consists
of the following separate hardware components:
■ module
■ disk drive
■
compact flash
Refer to the warranty booklet for warranty coverage details for each hardware
component.
The serial number of the disk drive is located on the disk drive (Figure C-1).