background image

Web browsers (HTTP on TCP/IP Network)

1. Start the Web browser (for example, Netscape 

Navigator or Microsoft Internet Explorer).

2. Enter the Internet (IP) address or host name of the 

CD-ROM server as the URL (for example, 

http://192.124.138.80

).

3. When the CD-ROM server home page is displayed, you 

are communicating with the CD-ROM server. (If 
desired, save the URL using the browser’s Bookmarks 
or Favorites utilities.)

4. Under ‘Accessible CDs’, you can click a CD to see the 

contents.

Accessing a new CD-ROM disc

When you insert a disc into any connected drive, a 
directory is created on the server. The directory name 
will be the disc’s 

volume name

 (if a volume name in upper 

case had been assigned on the disc during manufacture). 
If a volume name can’t be identified, the name 

cd_nnnnn

  

(where 

nnnnn

 is a unique 5 digit number) will be 

assigned. The data on the disc is accessed through this 
directory. 

Note:

 

 Some CD-ROM software may require that the disc 

be assigned an 

individual drive letter

 in Windows. See 

chapter 4 in the 

User’s Guide

 for details.

If a valid disc is inserted into any connected drive, 
the green ‘CD’ light on the HP CD-ROM Server 
should turn on. If it does not, power off your 
CD-ROM server and drives, check your SCSI cable 
connections. Restore power first to the drives, then 
the CD-ROM server.

For Basic Setup, 
Advanced 
Configuration, or 
Management:
username = 

root

password = 

pass

(factory defaults)

CD-ROM Server 
Home Page

Содержание J3278B - SureStore CD-ROM Server/Tower 7 NAS Server











Отзывы: