HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server, Быстрое руководство по установке

Страница: 4 / 10

CD-ROM server is ready for use
.
6. Insert a disc into a drive and verify that the green
CD
light on the server turns on. If it does not, verify your
SCSI cable connections and then power cycle the
CD-ROM server.
Network Configuration
Novell NetWare 4.x Configuration
As a NetWare 4.x NDS-compatible server, the HP
CD-ROM Server must be installed in the NDS tree,
which simply involves setting the appropriate
configuration parameters.
1. Use a Windows platform tool (such as Network
Neighborhood in Windows 95 or NT 4.0) to view the
directory structure. Locate the CD-ROM server’s
configuration file, which is at
HP hhhhhh _NW\sys\config\config.ini,
where
hhhhhh
are the last six digits of the LAN hardware address.
2. Open
config.ini
with a text editor and enter the
appropriate values in these parameters:
3. Save the
config.ini
file. This sends the values to the
CD-ROM server. The installation will take about 30
seconds.
4. After installation you must logout and then login
again. Then proceed to “Mounting or Mapping
Network Drives”.
If you are using the SMB protocol to communicate
with the CD-ROM server (e.g., Windows 95 or NT
networks), network configuration is not required.
Proceed directly to “Mounting or Mapping Network
Drives”.
If the CD-ROM server is not on an NDS network (for
example, NetWare 3.x), network configuration is not
required.
NDSTreeName
The name of the tree that you want to install
the server into.
NDSServerContext
The context in the NDS tree where you want
to install the server.
NDSAdminName
Distinguished name of a user or administrator
with Supervisor rights on the [Root] object,
and Create rights in the context where you
are installing the server.
NDSAdminPassword
The password of the administrator entered in
NDSAdminName shown above.
NDSInstall
Change this to ‘
install
’ when you are
ready to install the server.