Before You Begin
Typical Ethernet (10Base-T) Network with an
HP CD-ROM Server Stand-Alone Module
•
Stand-Alone version only:
Verify that the
CD-ROM Server power supply (19V DC) is
marked with the correct AC voltage and fre-
quency for your country.
•
Verify that power is
not connected
to the
CD-ROM server or any of the CD-ROM drives.
The SCSI bus may be damaged if you connect or
disconnect any units when the power is on.
•
Verify with your Network Administrator that a
network connection is set up to add and configure
the CD-ROM server onto the network.
•
Record the LAN hardware (MAC) address of
the CD-ROM server.
You will need this address
during installation. The address is printed on the
label normally placed on the bottom of the server,
in the form 00-60-B0-
hh
-
hh
-
hh
(where
h
is a hexa-
decimal number).
•
Refer to the
User’s Guide
if you need more detailed
information.
HP CD-ROM
Server
SCSI
Network cables
cables
CD-ROM Drives
Network Hub
Содержание J3278B - SureStore CD-ROM Server/Tower 7 NAS Server
Страница 1: ......
