HP J3109A, Руководство по установке

Страница: 13 / 30

3
Downloading Software
3. Check the “OS Version” line in the Switch Information screen.
• If the version number is A.02.01 or later, the Switch 2000 can support
the 10Base-FL Module. In this case, go to “Installing the 10Base-FL
Module in an Unused Slot” on page 6.
• If the version number is earlier than A.02.01, download a new OS
before installing the 10Base-FL Module. In this case, continue with
the instructions in this section before you install the module.
Software Sources and Content
First-Time 10Base-FL Module Installation: Generally, if you are installing
the 10Base-FL Module in your Switch 2000 for the first time, use the software
provided on the disk you received with the module.
Upgrading a Previous 10Base-FL Module Installation: If you are
upgrading the software for an existing 10Base-FL Module installation, you can
use software that is either provided on a current disk or obtained in a
compressed, self-extracting file named
j3100a.exe
that you can download
from Hewlett-Packard’s World Wide Web or other electronic sources. (Refer
to “HP Customer Support Services” on the card included in the front of this
manual.)
Both the disk and the self-extracting (
j3100a.exe
) file contain one or more
of the following files:
■
The switch update utility, named
update.exe
, and a
readme.txt
file
containing instructions on how to use the update utility, plus other
information. (This is a PC-based utility that you can run from DOS or from
a DOS window to download the switch software from a PC directory. This
utility requires an RS-232 serial connection to the Switch 2000.)
■
The proprietary MIB file for the Switch 2000.
■
Two OS files:
filename .swi
filename .fdd
where filename will be the same for both files; for example :
A_02_01.swi
OS for the Switch 2000 chassis and all
Switch 2000 modules that operate with
version A.02.01 or earlier software
A_02_01.fdd
OS for the FDDI Module. (Necessary if
an FDDI Module is installed.)
blue_2b.fm5 Page 3 Monday, September 23, 1996 8:03 AM