HP J282 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 278

HP J282 Скачать руководство пользователя страница 58

2-16

5.

The Peripheral Devices window opens. Double–click on Disks
and File Systems–>.

6.

The Disks and File Systems window opens. Double–click on
CD–ROM, Floppy, and Hard Disks.
The following screen message appears:

Scanning the system’s hardware...

The CD–ROM, Floppy, and Hard Disks window opens con-
taining a list of drives currently configured on thie system.
Disks that are unmounted have the word ”unused” in the Use
column.

7.

From the Actions menu, click on Add a Hard Disk Drive.

8.

The Select a Disk to Add... window opens with a list of unused
disks. Highlight the CD-ROM disc you want to mount.

9.

Click on

O K

.

10.

The Set Disk Usage and Options... window opens. Select File
System and click on

O K

.

11.

The following screen messages appear:

Task started.

Creating the device file...

Mounting file system...

Modifying “/etc/checklist”...

Task completed.

«
...
56
57
58
59
60
...
»

Содержание J282























































































































































































































































































Отзывы:

Нет отзывов