manualshive.com logo in svg

HP J282, Руководство пользователя, Страница: 264 / 278

Поделиться
Скачать
HP J282 Скачать руководство пользователя страница 264

GL-16

nonvolatile memory

System memory that retains its contents even after workstation power
is turned off.

object

Any file, directory, or link in the network. See also directory, file,
link, pathname.

operating system

The program that supervises the execution of other programs on your
workstation. For example, the entire HP–UX system, including the
kernel and all HP–UX commands. See also kernel.

option

See command option.

output device

Any of several pieces of hardware used for receiving messages from
the workstation. Display screens and printers are examples of output
devices. See also input device.

output window

The window that displays a process response to your command.

parent directory

A directory that contains other directories, each of which is then
called a subdirectory. See also subdirectory.

Содержание J282























































































































































































































































































Отзывы:

Нет отзывов