Section 1, page 15
Setting Up Your HP iPAQ h6315 Pocket PC
Now that you have been introduced, it is time to set up your Pocket PC.
Inserting Your T-Mobile SIM Card
NOTE: If the battery is already installed, you must remove it before inserting the SIM card.
1. On the back of the Pocket PC, push the SIM
tray to the right (1) to unlock and lift up (2)
to open.
2. Insert the SIM card into the SIM slot
by aligning the notched corner on the
card with the notched corner in the
SIM tray (3).
3. Press the SIM tray (with the SIM card
inserted) down into the SIM slot and lock it
into place by sliding the tray to the left.
Inserting the Battery
1. Insert the two tabs (1) on the top of the battery
into the two latches on the back of the Pocket
PC.
2. Snap the bottom of the battery into place (2).
3. Insert the stylus into the battery lock and slide
the lock to the left (green locked position).
IMPORTANT: The battery lock must be in the green locked
position for the Pocket PC to operate. If you
do not lock the battery, you will not be able
to power on the Pocket PC.
To see how much battery power there is on your Pocket PC, refer to the battery
indicator located at
Start > Settings > System tab > Power
.
Содержание iPAQ h6315
Страница 1: ...TM1209 ...
Страница 2: ...G E T M O R E F R O M L I F E HP iPAQ h6315 Guide ...
Страница 4: ......
Страница 72: ......