HP Integrity rx6600 Скачать руководство пользователя | Manualshive

Страница: 72 / 84

background image

Replace

CYBORG234.BIN

with the name of your firmware file.

The following screen displays:

*************************************************************
Smart Array Offline Firmware Update Utility
Version: 1.04.12.00

(C) Copyright 2004 Hewlett Packard Development Company L.P.
*************************************************************

Updating controller in Seg: 1, Bus: 51, Dev: 4, Func: 0
Current firmware version 1.92
Percentage completed: 100%
Activating firmware now, this may take several minutes.
Resetting and reinitializing controller.
Retrieving firmware version, this may take several minutes.
Current controller firmware version is 2.34.
The UPDATE command will not prevent downgrade to a lower firmware version.

After updating the firmware, cycle the power on the system and on any external JBODS connected
to the Smart Array HBAs.

Exit status codes

0: Success

UPDATE all

When “all” is specified, the utility downloads the firmware image to all the controllers to which
the firmware image applies and updates the remaining controllers. If an update operation fails for
a controller, the utility still updates the remaining controllers.

The example below shows the command to update all controllers for which the firmware image
file applies. The controllers for which the firmware image is not applicable are skipped. In this
example, the Smart Array 6400 controller is updated, and the Smart Array 5300 is skipped:

fs0:\> saupdate UPDATE all CYBORG234.BIN

Replace

CYBORG234.BIN

with the name of your firmware file.

The following screen displays, showing the controllers that are updated and skipped:

*************************************************************
Smart Array Offline Firmware Update Utility
Version: 1.04.12.00

(C) Copyright 2004 Hewlett Packard Development Company L.P.
*************************************************************

Updating controller in Seg: 1, Bus: 51, Dev: 4, Func: 0
Current firmware version 1.92

Percentage completed: 100%
Activating firmware now, this may take several minutes.
Resetting and reinitializing controller.
Retrieving firmware version, this may take several minutes.
Current controller firmware version is 2.34.

************************************************************
Smart Array Offline Firmware Update Utility
Version: 1.04.12.00
(C) Copyright 2004 Hewlett Packard Development Company L.P.
*************************************************************

Firmware Image is not suitable for HP Smart Array
5300 Controller at Seg: 1, Bus 20, Dev: 1, Func:0

After updating the firmware, cycle the power on the system and on any external JBODS connected
to the Smart Array HBAs.

72

Installing the System

«
...
70
71
72
73
74
...
»

Содержание Integrity rx6600





















































































Отзывы:

Нет отзывов

Похожие инструкции для Integrity rx6600

Бренд: tams elektronik Страницы: 21

Бренд: Royal Vendors Страницы: 2

Бренд: Emos Страницы: 24

Бренд: Edge Wireless Страницы: 5

Wireless USB Adapter Set

Бренд: Olidata Страницы: 25

SETU ATA211 SIP-FXS-FXO

Бренд: Matrix Страницы: 178

Бренд: TOOLCRAFT Страницы: 2

AirLive HP-3000E

Бренд: Air Live Страницы: 39

Бренд: Mellanox Technologies Страницы: 42

Бренд: Lenze Страницы: 18

Бренд: Mitsubishi Страницы: 250

Бренд: Abocom Страницы: 20

XETB1001 - 85 MBit/s Powerline Network Adapters

Бренд: NETGEAR Страницы: 2

Бренд: Laser Страницы: 2

Бренд: Hypertec Страницы: 1

Бренд: Arrow Страницы: 8

Бренд: Rittal Страницы: 14

Бренд: Ram Mounts Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды