Removing expansion slot covers
CAUTION:
To prevent damage to the server or expansion boards, power off the server, and
then remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the
amount of time the access panel is open.
1.
Remove the access panel (
“Removing the access panel” (page 42)
).
2.
Remove the PCI riser cage (
“Removing the PCI riser cage” (page 43)
).
3.
Remove the expansion slot cover.
•
To remove slot cover 1 or 4, push the retainer to release it, and then slide out the cover.
•
To remove slot covers 2 and 3, lift up and remove the latch, and then remove the cover.
•
To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then
remove the cover.
HP Confidential
44
Optional components
