HP integrity rx2800 i4, Руководство пользователя

Страница: 107 / 156

Removing and replacing the optical drive filler
To remove the component:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1. Power off the server ( “Powering off the server” (page 99) ).
2. Extend or remove the server from the rack.
3. Remove the access panel. See “Removing the access panel” (page 42) .
4. Remove the fans 2 and 3. See “Removing and replacing a hot-swap fan” (page 108) .
5. Push out the drive filler.
NOTE: You might have to use a nonconductive tool with a length of at least 20 cm and a
thickness of about 1 mm to push out the drive filler. HP recommends using a ruler or similar
tool.
To replace the component, reverse the removal procedure.
Removing and replacing the optical drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1. Power off the server ( “Powering off the server” (page 99) ).
2. Extend or remove the server from the rack. See “Removing the server from the rack” (page
99) .
3. Remove the access panel. See “Removing the access panel” (page 42) .
4. Remove the fans 2 and 3. See “Removing and replacing a hot-swap fan” (page 108) .
5. Disconnect the drive cable.
HP Confidential Removing and replacing the optical drive filler 107