HP Integrity rx2600, Руководство по установке, Страница: 38 / 68

Troubleshooting Your System
Solving Hardware Problems
Chapter 2 38
Solving Hardware Problems
This table gives basic troubleshooting tips. For more in-depth
information, see the section “Accessing System Diagnostics” in this
manual.
Table 2-1 Your System Does Not Start Properly
The system doesn’t power on.
Make sure... How
The system’s power cord is properly
connected. Connect the power cord to a working
power outlet and to the rear of the
system.
There is a buzzing noise.
A beep code when the system starts up means that there is a configuration
problem. Many of the ebuzzer codes relate to the LED diagnostic codes. See
section “Using the LEDs and e-buzzer to Troubleshoot Your System”.
Make sure... How
This is the pre-boot diagnostics
capability feature. It detects
problems with your system. 1.
Count the number of beeps after the
buzzer (refer to the section
“Troubleshooting with the e-buzzer”
in this chapter).
2.
Contact HP Support (refer to
page 54).
If you still have a problem, see “Accessing System Diagnostics” on page 43.