HP Integrity rx2600, Руководство по установке

Страница: 19 / 68

Setting Up and Using Your System
Setting Up Your HP zx6000 or rx2600 System
Chapter 1 19
Setting Up Your HP zx6000 or rx2600 System
WARNING If you have any doubt that you can lift the system or monitor
safely, do not try to move them without help.
1. Check the materials list shipped with your system to verify that you
have all of the components necessary for setting up your system.
2. If the system is to be used as a desk-side workstation, place the
system in an area with easily accessible power outlets and enough
space for the keyboard, mouse, and any other accessories.
3. If the system is to be used as a rack-mounted server, please refer to
the rack mounting instructions provided with your rack mount
system.
4. Position the system so that its rear connectors are easily accessible.
Installation Tools
No tools are required to set up your system. However, if you plan to
install or replace an accessory inside your system, you will need a T-10
and T-15 Torx screwdriver or a flat-blade screwdriver. Make sure you use
the Electrostatic Discharge equipment (static-free mat, static strap,
anti-static bags, etc.) to prevent damage to the system.
WARNING Metallic particulates can be especially harmful around
electronic equipment. This type of contamination may enter the
data center environment from a variety of sources, including,
but not limited to, raised floor tiles, worn air conditioning parts,
heating ducts, rotor brushes in vacuum cleaners or printer
component wear. Because metallic particulates conduct
electricity, they have an increased potential for creating short
circuits in electronic equipment. This problem is exaggerated by
the increasingly dense circuitry of electronic equipment.