6.
Remove the DIMM from the slot.
IMPORTANT:
DIMMs do not seat fully if turned the wrong way.
To replace the component, reverse the removal procedure.
CPU baffle
CAUTION:
To prevent damage to the server blade, never power on a server blade without a
CPU baffle or CPU in each CPU socket. The CPU baffle is needed for proper system cooling
CAUTION:
Immediately install a CPU baffle in an empty CPU socket. To avoid damage to the
socket pins, the socket should never be uncovered for more than 5 seconds. If the socket is damaged,
the entire base blade must be replaced.
1.
power off the server blade and remove it from the server blade enclosure (
“Preparing the
server blade for servicing”
).
2.
Remove the access panel (
“Access panel” (page 113)
).
CPU baffle
117
