4.
Remove any mezzanine card installed in slot 2 (
“Mezzanine cards” (page 123)
).
5.
If installed, remove the BBWC battery (
“Removing the BBWC battery”
).
6.
Remove the battery mounting bracket
Removing the BBWC battery
CAUTION:
If you must remove the cache module to transfer data, the battery must remain
connected so that the data is preserved. If you must keep the battery connected to the cache module,
follow the steps for 512MB cache module removal (
“Removing the 512MB cache module”
) instead
of using this procedure.
1.
Back up all data.
2.
Close all applications.
3.
power off the server blade and remove it from the server blade enclosure (
“Preparing the
server blade for servicing”
).
4.
Remove the access panel (
“Access panel” (page 113)
).
5.
Remove the DIMM baffle (
“DIMM baffle” (page 115)
)
6.
Lift up on the battery to remove it from the battery bracket.
7.
Push the battery cable down and towards the rear of the server blade to push it out of the
battery bracket's C-hook.
Installing internal components
61
