HP HPE FlexNetwork 7500 series, Руководство по настройке

Страница: 112 / 592

100
Step Command Remarks
2. Enter OSPF view.
ospf [ process-id | router-id router-id
| vpn-instance vpn-instance-name ]
*
N/A
3. Enable OSPF NSR.
non-stop-routing
By default, OSPF NSR is disabled.
This command takes effect only for the
current process. As a best practice,
enable OSPF NSR for each process if
multiple OSPF processes exist.
Configuring BFD for OSPF
BFD provides a single mechanism to quickly detect and monitor the connectivity of links between
OSPF neighbors, which improves the network convergence speed. For more information about BFD,
see
High Availability Configuration Guide .
OSPF supports the following BFD detection modes:
•
Bidirectional control detection —Requires BFD configuration to be made on both OSPF
routers on the link.
•
Single-hop echo detection —Requires BFD configuration to be made on one OSPF router on
the link.
Configuring bidirectional control detection
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable BFD bidirectional
control detection.
ospf bfd enable
By default, BFD bidirectional control
detection is disabled.
Both ends of a BFD session must be
on the same network segment and in
the same area.
Configuring single-hop echo detection
Step Command Remarks
1. Enter system view.
system-view N/A
2. Configure the source
address of echo packets.
bfd echo-source-ip ip-address
By default, the source address of echo
packets is not configured.
3. Enter interface view.
interface interface-type
interface-number
N/A
4. Enable BFD single-hop
echo detection.
ospf bfd enable echo
By default, BFD single-hop echo
detection is disabled.