HP HPE FlexNetwork 7500 series, Руководство по настройке

Страница: 352 / 592

340
Network NextHop MED LocPrf PrefVal Path/Ogn
* >i 9.1.1.0/24 10.1.3.1 0 100 0 100i
[SwitchD] display bgp routing-table ipv4 9.1.1.0
BGP local router ID: 4.4.4.4
Local AS number: 65001
Paths: 1 available, 1 best
BGP routing table information of 9.1.1.0/24:
From : 10.1.3.1 (1.1.1.1)
Rely nexthop : 10.1.3.1
Original nexthop: 10.1.3.1
OutLabel : NULL
AS-path : 100
Origin : igp
Attribute value : MED 0, localpref 100, pref-val 0, pre 255
State : valid, internal-confed, best
IP precedence : N/A
QoS local ID : N/A
Traffic index : N/A
The output shows the following:
•
Switch F can send route information to Switch B and Switch C through the confederation by
establishing only an EBGP connection with Switch A.
•
Switch B and Switch D are in the same confederation, but belong to different sub-ASs. They
obtain external route information from Switch A, and generate identical BGP route entries
although they have no direct connection in between.
BGP path selection configuration example
Network requirements
As shown in Figure 75 , all switches run BGP.
•
EBGP runs between Switch A and Switch B, and between Switch A and Switch C.
•
IBGP runs between Switch B and Switch D, and between Switch D and Switch C. OSPF is the
IGP protocol in AS 200.
Configure routing policies, making Switch D use the route 1.0.0.0/8 from Switch C as the optimal.