HP HPE FlexNetwork 7500 series, Руководство по настройке

Страница: 17 / 592

5
Step Command Remarks
4. Set the maximum lifetime for
IPv4 routes in the FIB.
fib lifetime seconds
By default, the maximum
lifetime for routes in the FIB
is 600 seconds.
To set the maximum lifetime for routes in the FIB (IPv6):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIB view.
rib N/A
3. Create the RIB IPv6 address
family and enter its view.
address-family ipv6
By default, no RIB IPv6
address family exists.
4. Set the maximum lifetime for
IPv6 routes in the FIB.
fib lifetime seconds
By default, the maximum
lifetime for routes in the FIB
is 600 seconds.
Enabling the RIB to flush route attribute
information to the FIB
This feature is available only for BGP routes in the current software version. You can configure this
feature when using sFlow to monitor BGP traffic. For more information about BGP path attributes
and sFlow, see
Layer 3
—
IP Routing Configuration Guide and Network Management and Monitoring
Configuration Guide .
To enable RIB to flush route attribute information to the FIB:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIB view.
rib N/A
3. Create the RIB IPv4 address
family and enter its view.
address-family ipv4
By default, no RIB IPv4
address family exists.
4. Enable the RIB to flush route
attribute information to the
FIB.
flush route-attribute
protocol
By default, the RIB does not
flush route attribute
information to the FIB.
Setting the maximum number of ECMP routes
This configuration takes effect at reboot. Make sure the reboot does not impact your network.
To set the maximum number of ECMP routes:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Set the maximum number of
ECMP routes.
max-ecmp-num number
By default, the maximum
number of ECMP routes is
not set.