manualshive.com logo in svg

HP HP ProLiant DL385 G6, Руководство пользователя, Страница: 59 / 106

Поделиться
Скачать
HP HP ProLiant DL385 G6 Скачать руководство пользователя страница 59

 

Configuration and utilities  59 

Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation 

Pack

 

or the HP website (

http://www.hp.com/servers/manage

). 

 

Redundant ROM support 

The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server 

has a 8-MB ROM that acts as two, separate 4-MB ROMs. In the standard implementation, one side of the 
ROM contains the current ROM program version, while the other side of the ROM contains a backup 

version. 

  

 

NOTE:

  The server ships with the same version programmed on each side of the ROM. 

  

 

Safety and security benefits 

When you flash the system ROM, ROMPaq writes over the backup ROM and saves the current ROM as a 

backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted 
for any reason. This feature protects the existing ROM version, even if you experience a power failure 

while flashing the ROM. 

 

USB support and functionality 

USB support 

HP provides both standard USB support and legacy USB support. Standard support is provided by the 

operating system through the appropriate USB device drivers. HP provides support for USB devices prior 

to the operating system loading through legacy USB support, which is enabled by default in the system 

ROM. HP hardware supports USB version 2.0. 
Legacy USB support provides USB functionality in environments where USB support is normally not 

available. Specifically, HP provides legacy USB functionality at:  

•

 

POST  

•

 

RBSU  

•

 

Diagnostics  

•

 

DOS  

•

 

Environments which do not support USB natively 

For more information on ProLiant USB support, refer to the HP website 

(

http://www.compaq.com/products/servers/platforms/usb-support.html

). 

 

Internal USB functionality 

An internal USB connector is available for use with USB drive keys only. This solution provides for use of 

a permanent boot drive from a USB drive key installed in the internal connector, avoiding issues of 
clearance on the front of the rack and physical access to secure data. 
For additional security, you can disable the external USB connectors through RBSU. Disabling the rear 

USB connectors in RBSU disables both rear USB ports. 

 

Содержание HP ProLiant DL385 G6











































































































Отзывы:

Нет отзывов