Hardware options installation 46
7.
Install the DIMM.
8.
Install the air baffle ("
Remove the air baffle
" on page
23
).
9.
Install the PCI riser cage (on page
23
).
10.
Install the access panel (on page
22
).
11.
Install the server into the rack.
12.
Power up the server (on page
20
).
For more information about LEDs and troubleshooting failed DIMMs, see "Systems Insight Display LEDs
and internal health LED combinations (on page
9
)."
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
•
The system automatically sets all device numbers.
•
If only one hard drive is used, install it in the bay with the lowest device number ("
Hard drive
numbering
" on page
15
).
•
Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
Installing a hot-plug SAS hard drive
1.
Remove the SAS hard drive blank.
Содержание HP ProLiant DL385 G6
