HP HP ProLiant DL385 G6 Скачать руководство пользователя страница 55

Страница: 55 / 106

Configuration and utilities 55

intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a

default setting based on the number of drives connected to the server.

NOTE:

The server may not support all the following examples.

NOTE:

If the boot drive is not empty or has been written to in the past, ORCA does not

automatically configure the array. You must run ORCA to configure the array settings.

Drives installed

Drives used

RAID level

1 1 RAID

2 2 RAID

3, 4, 5, or 6

RAID 5

More than 6

None

To change any ORCA default settings and override the auto-configuration process, press the

key when

prompted.
By default, the auto-configuration process configures the system for the English language. To change any

default settings in the auto-configuration process (such as the settings for language, operating system, and

primary boot controller), execute RBSU by pressing the

key when prompted. After the settings are

selected, exit RBSU and allow the server to reboot automatically.
For more information on RBSU, see the

HP ROM-Based Setup Utility User Guide

on the Documentation CD

or the HP website (

http://www.hp.com/support/smartstart/documentation

Boot options

Near the end of the boot process, the boot options screen is displayed. This screen is visible for several

seconds before the system attempts to boot from a supported boot device. During this time, you can do

the following:

•

Access RBSU by pressing the

key.

•

Access the System Maintenance Menu (which enables you to launch ROM-based Diagnostics or
Inspect) by pressing the

F10

key.

•

Force a PXE Network boot by pressing the

F12

key.

BIOS Serial Console

BIOS Serial Console allows you to configure the serial port to view POST error messages and run RBSU

remotely through a serial connection to the server COM port. The server that you are remotely configuring

does not require a keyboard and mouse.
For more information about BIOS Serial Console, see the

BIOS Serial Console User Guide

on the

Documentation CD or the HP website (

http://www.hp.com/support/smartstart/documentation

Array Configuration Utility

ACU is a browser-based utility with the following features:

•

Runs as a local application or remote service

Содержание HP ProLiant DL385 G6











































































































Результаты поиска

Содержание HP ProLiant DL385 G6

Отзывы:

Похожие инструкции для HP ProLiant DL385 G6

Бренды по названию

Популярные бренды

HP HP ProLiant DL385 G6, Руководство пользователя

Результаты поиска

Содержание HP ProLiant DL385 G6

Отзывы:

Похожие инструкции для HP ProLiant DL385 G6

Бренды по названию

Популярные бренды