HP FlexNetwork NJ5000, Руководство пользователя

Страница: 242 / 475

230
Figure 236 Creating an IPv6 static route
3.
Create an IPv6 static route as described in Table 90 .
4.
Click
Apply
.
Table 90 Configuration items
Item Description
Destination IP Address
Enter the destination host or network IP address, in the X:X::X:X format. The
128-bit destination IPv6 address is a hexadecimal address with eight parts
separated by colons (:). Each part is represented by a 4-digit hexadecimal
integer.
Prefix Length Enter or select the prefix length of the destination IPv6 address.
Preference
Set a preference value for the static route. This setting is for route selection
among multiple routes to the same destination.
You can use the default setting because you can have only one IPv6 static
route to one destination.
Next Hop Enter the next hop address, in the same format as the destination IP address.
Interface Select the management VLAN interface as the outgoing interface.
NOTE:
To remove a route, access the
Remove
tab.
Displaying the IPv6 active route table
Select
Network
>
IPv6 Routing
from the navigation tree. The
Summary
tab displays the IPv6
routing table.
The IPv6 routing table contains direct routes that are automatically generated by the system as well
as an IPv6 static route if you have configured one.