HP FlexNetwork NJ5000, Руководство пользователя

Страница: 409 / 475

397
Item Description
Check Logging
Select this box to keep a log of matched IPv6 packets.
A log entry contains the ACL rule number, operation for the matched
packets, protocol number, source/destination address,
source/destination port number, and number of matched packets.
This function is not supported.
IP
Address
Filter
Source IP Address
Select the
Source IP Address
box and enter a source IPv6 address
and prefix length.
The IPv6 address must be in a format like X:X::X:X. An IPv6 address
consists of eight 16-bit long fields, each of which is expressed with
two hexadecimal numbers and separated from its neighboring fields
by colon (:).
Source Prefix
Destination IP Address
Select the
Destination IP Address
box and enter a destination IPv6
address and prefix length.
The IPv6 address must be in a format like X:X::X:X. An IPv6 address
consists of eight 16-bit long fields, each of which is expressed with
two hexadecimal numbers and separated from its neighboring fields
by colon (:).
Destination Prefix
Protocol
Select the protocol number.
If you select
58 ICMPv6
, you can configure the ICMP message type
and code. If you select
6 TCP
or
17 UDP
, you can configure the TCP
or UDP specific items.
ICMPv6
Type
Named ICMPv6 Type Specify the ICMPv6 message type and code.
These items are available only when you select
58 ICMPv6
from the
Protocol
list.
If you select
Other
from the
Named ICMPv6 Type
list, you need to
enter values in the
ICMPv6 Type
and
ICMPv6 Code
fields.
Otherwise, the two fields will take the default values, which cannot
be changed.
ICMPv6 Type
ICMPv6 Code
TCP/UD
P Port
Source
Operator Select the operators and enter the source port numbers and
destination port numbers as required.
These items are available only when you select
6 TCP
or
17 UDP
from the
Protocol
list.
Different operators have different configuration requirements for the
port number fields:
•
Not Check
—The following port number fields cannot be
configured.
•
Range
—The following port number fields must be configured
to define a port range.
•
Other values
—The first port number field must be configured
and the second must not.
Only
Not Check
and
Other values
are supported.
Port
To Port
Destinat
ion
Operator
Port
To Port
Time Range Select the time range during which the rule takes effect.