42
Item
Specification
Transmission medium and max transmission
distance
See FE SFP transceiver modules in
Table 16
and GE SFP
transceiver modules in
Table 19
.
Functions and services
Software upgrade and network management
Table 16 FE SFP transceiver modules
Product code Description
Central
wavelength
(nm)
Fiber diameter
(µm)
Maximum
transmission
distance
JD102B
HPE X115 100M SFP
LC FX Transceiver
1310
50/125
2 km (1.24 miles)
62.5/125
JD120B
HPE X110 100M SFP
LC LX Transceiver
1310
9/125
15 km (9.32 miles)
JD090A
HPE X110 100M SFP
LC LH40 Transceiver
1310
9/125
40 km (24.86 miles)
NOTE:
Use the copper management Ethernet port for upgrading through BootWare. The fiber management
Ethernet port cannot be used for file transmitting when the BootWare menu is used.
USB port
The switch has one OHCI-compliant USB 2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the flash of the switch, for
example, to upload or download application and configuration files.
The USB port supplies power as per USB 2.0 specifications. Use only USB 2.0-compliant USB
devices for the USB port. The port might be unable to identity USB devices that are not compliant
with USB 2.0.
NOTE:
USB devices from different vendors vary in compatibilities and drivers. Hewlett Packard Enterprise
does not guarantee correct operation of USB devices from other vendors on the switch. If a USB
device fails to operate on the switch, replace it with one from another vendor.
SFP+ port
The switch provides 48 SFP+ ports. The SFP+ ports support the following transceiver modules and
cables:
•
10-GE SFP+ transceiver modules in
Table 17
.
•
10-GE SFP+ copper cables in
Table 18
.
•
GE SFP transceiver modules in
Table 19
.
