HP FC Switch Surestore 6164, Справочное руководство

Страница: 68 / 236

68 HP Surestore FC Switch 6164 Installation and Reference Guide
d. Enter the requested information at the prompts, pressing Enter after
each entry:
–
Server Name or IP Address [host]:
Name or IP address
of computer on which profile is located.
–
User Name [user]:
Login name required to access computer.
–
File Name [/usr/switch/firmware]:
Filename or
absolute path of Fabric Watch profile.
–
Protocol (RSHD or FTP) [rshd]:
Press Enter to use
RSHD, or enter FTP to use FTP protocol.
–
Password:
Enter the FTP password (only displays if FTP
protocol was selected).
e. Re-enable the switch by entering the following:
switchEnable
17.Implement the downloaded items:
•
If a configuration file was downloaded to the new switch, the switch must
be rebooted to implement the new configuration. To reboot the switch,
enter the following at the prompt and press Enter (this is automatically a
fastboot due to the command entered in Step 13):
reboot
•
If no configuration was downloaded, a reboot is not required, but the
switch must still reload the Fabric Watch profile. To reload the profile,
enter the following at the prompt and press Enter:
fwConfigReload
18.Specify any desired custom status policies.
Note
If the configuration of the previous switch was downloaded to the
new switch, the status policies will already match those of the previous
switch.
a. Log on to the new switch by Telnet.
b. Enter the following at the prompt and press Enter:
switchStatusPolicySet