HP EliteOne 1000 G1 Скачать руководство пользователя | Manualshive

Страница: 65 / 114

background image

Table 5-3

Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

Allows certain operating systems to decrease the processors power consumption when the processor is
idle. Default is enabled.

S5 Maximum Power Savings (enable/disable)

Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is
removed from the wake up circuitry, the expansion slots, and any management features while in S5.
Default is disabled.

SATA Power Management (enable/disable)

Enables or disables SATA bus and/or device power management. Default is enabled.

PCI Express Power Management (enable/disable)

Enabling this option permits the PCI Express links to use Active Power State Management (ASPM) to enter
lower power states while not in use. Default is enabled.

Power On from Keyboard Ports (enable/disable)

When enabled, this feature allows a key press to power on the system when it is off (S5 state). If using a
USB keyboard, it must be plugged into one of the rear ports labeled with the keyboard icon. Default is
disabled.

Unique Sleep State Blink Rates (enable/disable)

This feature is designed to provide a visual indication of what sleep state the system is in. Each sleep
state has a unique blink pattern. Default is disabled.

NOTE:

A normal shutdown goes to the S4 state for Windows 8 or later.

S0 (On) = Solid white LED.

S3 (Stand By)= 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) — repeated
cycles of 3 blinks and a pause.

S4 (Hibernation)= 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (white LED) —
repeated cycles of 4 blinks and a pause.

S5 (Soft Off) = LED is off.

Electronic labels

Displays system labels.

Remote Management
Options

Active Management (AMT) (Intel only) (enable/disable). Default is enabled.

Allows you to discover, repair, and protect networked computing devices.

USB Key Provisioning Support (enable/disable) Default is disabled.

USB Redirection Support (enable/disable). Default is enabled.

USB redirection allows USB devices plugged into a client computer to be transparently redirected to the
guest operating system.

Unconfigure AMT on next boot (Do Not Apply/Apply). Default is ‘Do Not Apply’.

SOL Terminal Emulation Mode (ANSI / VT100). Default is ANSI.

SOL terminal emulation mode is only activated during remote AMT redirection operations. The emulation
options allow administrators to select which mode works best with their console.

Show Unconfigure ME Confirmation Prompt (enable/disable). Default is enabled.

Verbose Boot Messages (enable/disable). Default is enabled.

Verbose boot shows additional logging information during the boot. mainly for debugging if something
goes wrong during bootup.

Watchdog Timer (enable/disable). Default is enabled.

Computer Setup (F10) Utilities

57

«
...
63
64
65
66
67
...
»

Содержание EliteOne 1000 G1



















































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteOne 1000 G1

Бренд: NB Страницы: 14

Бренд: Ocean Matrix Страницы: 2

Бренд: Samsung Страницы: 48

Бренд: Samsung Страницы: 37

SyncMaster 460UTn-2

Бренд: Samsung Страницы: 26

Бренд: Samsung Страницы: 55

SyncMaster 206NW

Бренд: Samsung Страницы: 59

SYNCMASTER 152X/172X

Бренд: Samsung Страницы: 58

Бренд: Samsung Страницы: 72

SyncMaster S19A350N

Бренд: Samsung Страницы: 88

SyncMaster 181B

Бренд: Samsung Страницы: 65

Бренд: Samsung Страницы: 51

MultiSync LCD1990FX

Бренд: NEC Страницы: 2

Бренд: Alienware Страницы: 68

Бренд: König Страницы: 95

HANNS-G HL247HGB

Бренд: HANNspree Страницы: 23

MediaMaster I05

Бренд: JL Audio Страницы: 43

Premium Digital 01-561

Бренд: smartheart Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды